DRYGEAR PRO

The DryGear Professional is a powerful, efficient, and easy to use drying system. This system is completely safe for ALL turnout gear!

The polyester vinyl tent enclosure ensures that the inside and outside surfaces of all equipment receives the maximum amount of exposure to moving air.

Each station is able to accommodate a complete set of turnout gear including coat, pants, boots, helmet and gloves.

This multi-station system is available in 3, 4, 6, 7, and 8 station configurations. The DryGear Professional system can accommodate a complete set of turnout gear at each station.

Exceeds NFPA 1851 recommendations.

STANDARD FEATURES

Hanger Tube Assemblies Include Suspender Hooks
Completely Dry the Inside and Outside of Gear in 4 to 5 Hours
Transparent Easy Access Roll-Up Front Cover
Manifold and Frame Surfaces have an Industrial Powder Coat Finish
Available with an Optional Caster Kit (Wheels)
Tested and Proven in the Field Since 1992

Exceeds NFPA 1851 Standard on Selection, Care, and Maintenance of Structural Fire Fighting Protective Ensembles

The DryGear system utilizes forced air ventilation.
There is no mechanical action to damage gear.
The manifold and hanger tube assemblies provide maximum air exposure.
The system operates with or without heated air.
Heated air does not reach gear-degrading temperatures.
There is built-in heater cutoff protection.
The DryGear system is safe for ALL turnout gear.

Control Panel Features

Simple Operating Instructions
Six Hour Timer Switch
Air Only/Air & Heat Select Switch
Heater Selected Indicator Light

SPECIFICATIONS

Sizes
The DRY GEAR Professional is available in 3, 4, 6, 7, and 8 station configurations.
Air Flow
40-50 Cubic feet per minute (CFM) per station
Electrical requirements
220 VAC, 30 Amps
Motor (3,4, and 6 stations)
Power : 3 HP
Voltage : 208/230 Volts
Current : 15.5/15.3 Amps
Type : NEMA 56
Motor (7 and 8 stations)
Power: 5 HP
Voltage : 220 Volts
Current : 19.6 Amps
Type : NEMA 56
Heater
Power : 2400 Watts
Current : 10 Amps
Thermistor : Overheat Cutoff
Timer : 6 Hours
Materials
Tubing : Aluminum square and round tubing
Enclosure : Rip-stop polyester vinyl

MODELS

Part No	Long Description	Specs
DRYGEAR PRO
DGA230-A00	Gear dryer, PRO, 3 station	.rtf
DGA230-B00	Gear dryer, PRO, 3 station, wheels	.rtf
DGA240-A00	Gear dryer, PRO, 4 station	.rtf
DGA240-B00	Gear dryer, PRO, 4 station, wheels	.rtf
DGA260-A00	Gear dryer, PRO, 6 station	.rtf
DGA260-B00	Gear dryer, PRO, 6 station, wheels	.rtf
DGA270-A00	Gear dryer, PRO, 7 station	.rtf
DGA270-B00	Gear dryer, PRO, 7 station, wheels	.rtf
DGA280-A00	Gear dryer, PRO, 8 station	.rtf
DGA280-B00	Gear dryer, PRO, 8 station, wheels	.rtf
Options listed may not be available for all models.