This page provides specific details on Kwik-Raze telescopic poles and the options available.

All Kwik-Raze Telescopic Poles:

• Are made of extruded aluminum with an anodized finish.
• Have extension poles that rotate a full 360°.
• Have a concealed coil cord extending from the bottom
  (except the remote bottom raise).
• Have a locking collar assembly to secure the extension pole in position.
• Have a 1.875" O.D. outer pole and a 1.375" O.D. inner pole.

KR-SB-200 Series Telescopic Pole

Side Mount, Pull Up

• Two billet two-piece side mount brackets are provided.
• The standard outer tube is length 58" and the inner pole is 48".

Options on this pole include:

• Side Mount Brackets:
  1.5", 2", 4", or 7" offset available
• KB-SB-GR-12 12" Long Grab Rail
• KB-SB-GR-18 18" Long Grab Rail
• KB-SB-GR-24 24" Long Grab Rail
• -I (Raised Pole Indicator Switch)
• KRM25024 Body Wall Mounting Plate

KR-SB-300 Series Telescopic Pole

Thru-the-Body, Pull Up

• A thru-body mounting bracket is standard on the 300 series pole.
• The standard outer tube is length 58" and the inner pole is 48".

KR-SB-400 Series Telescopic Pole

Thru-the-Body, Push Up

• A thru-body mounting bracket is standard on the 400 series pole.
• The standard outer tube is length 12" and the inner pole is 48".
• At the bottom of the extension pole is a knurled aluminum push up handle.

Options on this model pole include:

• KB-2-SB-R 2" Lower Receiver Bracket
• KB-4-SB-R 4" Lower Receiver Bracket
• KB-7-SB-R 7" Lower Receiver Bracket
• -I (Raised Pole Indicator Switch)

KR-SB-500 Series Telescopic Pole

Side Mount, Push Up

• Two billet two-piece side mount brackets are provided.
• The standard outer tube is length 24" and the inner pole is 67.5".
• At the bottom of the extension pole is a knurled aluminum push up handle.

Options on this pole include:

• Side Mount Brackets:
  1.5", 2", 4", or 7" offset available
• KB-SB-GR-12 12" Long Grab Rail
• KB-SB-GR-18 18" Long Grab Rail
• KB-SB-GR-24 24" Long Grab Rail
• KB-2-SB-R 2" Lower Receiver Bracket
• KB-4-SB-R 4" Lower Receiver Bracket
• KB-7-SB-R 7" Lower Receiver Bracket
• KRM25024 Body Wall Mounting Plate
• -I (Raised Pole Indicator Switch)

Single Bolt Mounting Brackets

Side Mount Telescopic Pole Brackets

There are four single bolt mounting brackets available to secure side mount telescopic poles onto the vehicle. (Available in 1 1/2", 2", 4", and 7 1/2" offset.) The two-piece side-mounting brackets allow poles to be easily installed and removed for service without removing the brackets. Beware that the lamphead dimensions and location of the pole may dictate restrictions on the brackets that can be used.

Body Wall Mounting Plate Option
(Shown above on the 7 1/2" bracket.)

• Makes bolting equipment to light gage body walls stronger.
• Adds 1/2" to the offset bracket.

Lower Receiver Bracket Option
The lower receiver bracket provides added bottom support for bottom raise inner pole when it is in the down position.

Side Mount Telescopic Pole Grab Rail Option

Includes two mounting brackets and one rail. The two peice mounting brackets install easily on the outer tube.The is an NFPA compliant handle.