sba300_product_image

SEAT MONITOR & USB VDR, 12 seat

The Fire Research Seat Monitor and Data Acquisition System meets and exceeds the requirements laid out in NFPA 1901 (2009) paragraph 4.11 requirements for a Vehicle Data Recorder and paragraph 14.1.3.10 requirements for a Seat Belt Warning system. The display module has seat belt icons to display the current state of up to 12 programmed seats in the vehicle, a silence button for the audible alarm, power and data LEDs.

The separate Vehicle Data Recorder (VDR) houses the on-board computer and software, and the hardware for all system interconnections. It is capable of processing input data from the vehicle J1939 CAN Bus, the data link, or separate hard-wired inputs. The VDR communicates via the proprietary FRC data link with the system modules.

Click on the images below for details about system components.

The new page will describe the various components of the of the Seat Monitor system and how they are used to help keep your department fully NFPA compliant.

STANDARD FEATURES

  • Meets NFPA 1901 4.11 requirements
    • 48 Hours of Stored Second-by-Second Data
    • 100 Hours of Stored Minute-by-Minute Data
    • All Data is Date and Time Stamped
  • All Stored and Collected Data is Password Protected
  • HAWK Data Management Software Package
  • J1939 CAN Bus Interface
  • Discrete Inputs (When Data is not Available on J1939 CAN Bus)
  • LED to indicate when the VDR is receiving data from the ECM over the vehicle CAN bus.
  • Data Collector Remotely Uploads and Stores Data from up to 12 VDRs
  • Exceeds NFPA 1901 14.1.3.10 requirements
    • Monitors up to 12 Seating Positions
    • Provides a Visual Display Showing the Condition at Each Position
    • Validates Sit and Buckle Sequence
    • Audio and Visual Alarm Outputs
  • Programmable Seat Configuration

MODELS

Part No Long Description Specs
SEAT MONITOR & USB VDR, 12 seat
SBA343-A00 Seat Monitor & USB VDR, 12 seat N/A
Options listed may not be available for all models.