sba400_product_image

SEAT MONITOR & USB VDR, 6 Seat

The Fire Research Seat Monitor and Data Acquisition System meets and exceeds the requirements laid out in NFPA 1901 (2009) paragraph 4.11 requirements for a Vehicle Data Recorder and paragraph 14.1.3.10 requirements for a Seat Belt Warning system. The display module has seat belt icons to display the current state of up to 6 programmed seats in the vehicle, a silence button for the audible alarm, power and data LEDs.

The separate Vehicle Data Recorder (VDR) houses the on-board computer and software, the hardware for all system interconnections, and the USB connector for uploading stored data. It is capable of processing input data from the vehicle J1939 CAN Bus, the data link, or separate hard-wired inputs. The VDR communicates via the proprietary FRC data link with the system modules.

Click on the images below for details about HAWK Data Management Software.

STANDARD FEATURES

  • Meets NFPA 1901 4.11 requirements
    • 48 Hours of Stored Second-by-Second Data
    • 100 Hours of Stored Minute-by-Minute Data
    • All Data is Date and Time Stamped
  • All Stored and Collected Data is Password Protected
  • USB Connector for Uploading Data from VDR
  • HAWK Data Management Software Package
  • J1939 CAN Bus Interface
  • Discrete Inputs
  • LED to indicate when the VDR is receiving data from the ECM over the vehicle CAN bus.
  • Exceeds NFPA 1901 14.1.3.10 requirements
    • Monitors up to 6 Seating Positions
    • Provides a Visual Display Showing the Condition at Each Position
    • Validates Sit and Buckle Sequence
    • Audio and Visual Alarm Outputs
  • Programmable Seat Configuration

MODELS

Part No Long Description Specs
SEAT MONITOR & USB VDR, 6 Seat
SBA441-A00 Seat Monitor & USB VDR, 6 Seat .rtf
Options listed may not be available for all models.